The rounding of the corner of a countertop. Clip radius corners can be done on all styles of countertops except Dura-Top (self-edge, see ”Single Radius”). The dimensions are 2” towards the end cap and 1” towards the front nose.

The rounding of the corner of a countertop. Clip radius corners can be done on all styles of countertops except Dura-Top (self-edge, see ”Single Radius”). The dimensions are 2” towards the end cap and 1” towards the front nose.
The rounding of the corner of a countertop. Clip radius corners can be done on all styles of countertops except Dura-Top (self-edge, see ”Single Radius”). The dimensions are 2” towards the end cap and 1” towards the front nose.
A diagonal cut to the corner of a top, which can be done on all styles of countertops. Minimum is a 2” face clip.
A diagonal cut to the corner of a top, which can be done on all styles of countertops. Minimum is a 2” face clip.
A diagonal cut to the corner of a top, which can be done on all styles of countertops. Minimum is a 2” face clip.
A diagonal cut to the corner of a top, which can be done on all styles of countertops. Minimum is a 2” face clip.
A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.
A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.
A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.
A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.