Emilia Buckholz

Butt Joint Carrara Bianco 2

Butt Joint Carrara Bianco 2

A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.

Butt Joint Carrara Bianco 1

Butt Joint Carrara Bianco 1

A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.

Butt Joint Blackstar Granite 2

Butt Joint Blackstar Granite 2

A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.

Butt Joint Blackstar Granite 1

Butt Joint Blackstar Granite 1

A front-to-back seam required for any top over 144” long where two straight pieces of countertop are joined. Whenever possible, butt joints are positioned at the end of the countertop.

Bump Out Blackstar Granite 2

Bump Out Blackstar Granite 2

A 3” bump out applied to the front of a countertop is used when a center cabinet is deeper than the two cabinets on the sides. For example, with a cabinet that is 24” x 27” x 24”, the bump out will cover the 27” cabinet.

Bump Out Blackstar Granite 1

Bump Out Blackstar Granite 1

A 3” bump out applied to the front of a countertop is used when a center cabinet is deeper than the two cabinets on the sides. For example, with a cabinet that is 24” x 27” x 24”, the bump out will cover the 27” cabinet.

Bump Out Carrara Bianco 2

Bump Out Carrara Bianco 2

A 3” bump out applied to the front of a countertop is used when a center cabinet is deeper than the two cabinets on the sides. For example, with a cabinet that is 24” x 27” x 24”, the bump out will cover the 27” cabinet.

Bump Out Carrara Bianco 1

Bump Out Carrara Bianco 1

A 3” bump out applied to the front of a countertop is used when a center cabinet is deeper than the two cabinets on the sides. For example, with a cabinet that is 24” x 27” x 24”, the bump out will cover the 27” cabinet.

Banjo Carrara Bianco 2

Banjo Carrara Bianco 2

(Square-Edge only) – This is a special notch cut for vanities which provides a ledge over the toilet.

Banjo Carrara Bianco 1

Banjo Carrara Bianco 1

(Square-Edge only) – This is a special notch cut for vanities which provides a ledge over the toilet.