Instructions for Installing End Caps
In order to place end caps on the kitchen countertop, heat will be necessary. The rough surface on the back of the cap is a hot-melt glue which can be activated by heat.
Heat a household iron to its hottest setting. Place the cap against the countertop exactly as it will remain permanently. Then press the hot iron on the cap continuously moving the iron in a back-and-forth motion, not leaving the iron in any one place too long. As the end cap transfers the heat to the glue, the glue will become sticky and adhere to the countertop.
Finishing End Cap
Use an ordinary small tooth wood rasp or metal file to remove any excess from the end caps. Always file in toward the center of the countertop. This will prevent loosening of caps.
Instructions for Installing End Splash
Apply construction adhesive to the unfinished side of the end splash and place firmly against both the wall and the backsplash. Once the end splash is in place, use all-purpose adhesive caulk to on the seams where the end splash meets the wall and the countertop.
1 / 2 / 3 / 4
| 
|
|
|
|
